Printronix T4M - Change Media Sensor Setting
This walkthrough allows you to change the setting of the media sensor depending on the type of labels you are using with the printer.
- Place the printer offline and press menu button
- Press left or right arrow until sensor setup icon is highlighted, press return
- Use left/right arrows to highlight gap or mark sensor, for diecut labels select the gap sensor, press return to select your choice, pressing X returns to the Icon menu
To save your changes:
- Press offline then menu key
- Scroll to the configuration icon and press enter
- Use the left and right buttons to select a configuration to save to, Save config: 1 as an example
- Press return. Printer will display saving configuration
- Load your new config, scroll to the config you wish to load, config 1 as an example and press return, Loading saved configuration will display
- Press the X and return the printer online and test
Service
Repair: We demonstrate an extremely high level of technical expertise and service for a wide range of Printer Products. We can repair onsite or in our workshop. We can also select and help install printers for our customers.
Maintenance: Datatrade offer a flexible approach to maintenance and can tailor a contract to suit your needs.
Hardware: We can supply printers, printheads, print servers etc… For further information on finding the right printer please use our Hardware Selector or contact us using the details below.
Consumables: We can provide a large range of cost effective consumables for Thermal, Impact and Laser printers.
In addition to supplying these items, we will also work with you to ensure you are using the correct product for quality and cost effectiveness.
For further information please Ring +44(0)1604 66-66-06 or email us.
For further contact details please Click Here
